IB::Topic::DSL 3.3 and Linksys Wireless WPC54GS ver.2:: The DSL Forums » Welcome Guest :: » » » DSL 3.3 and Linksys Wireless WPC54GS ver.2, Get., Great VPS hosting provided by Pages: (2) 1 :::: Topic: DSL 3.3 and Linksys Wireless WPC54GS ver.2 GDSLC Group: Members Posts: 8 Joined: Aug. 2007 Posted: Sep. 03 2007,21:55 Hi, I'm new to DSL and so far loving it after bouncinging WinXP from my Dell Inspiron 1200.

• Linksys Wpc54gs Ver 2.1 Driver For Mac Pro
• Linksys Wpc54gs Ver 2.1 Driver For Mac Download
• Linksys Wpc54gs Ver 2.1 Driver For Mac Free

Everything seems to work except my wireless card. I would greatly appreciate any help and update this topic dilligently for others. Config: Dell Inspiron 1200 with Cisco Linksys Wireless-G 2.4 GHz 802.11g Notebook Adapter with Speed Booster Model WPC54GS ver.2. The card has one green light on and was working fine with Windows. When I access 'DSLpanel' and click 'Wlanconfig' I get a message that reads 'No wireless network card found.' I went to the DSL wiki which linked me to ndiswrapper.sourceforge.net where I found: 1. Card: Linksys WPC54GS v2 SpeedBooster, 54mbps/125mbps –.

Chipset: Broadcom BCM4318 Airforce One 54g 802.11g Wireless LAN Controller (rev 02). pciid: 14e4:4318 (rev 02). Driver: Linksys Driver CD: /mnt/cdrom0/Driver/NT/LSBCMNDS.inf, bcmwl5.sys, LSBCMNDS.cat.

Other: Kernel: 2.6.15-1-586tsc, Ndiswrapper: 1.5-1 via Debian Etch, wpasupplicant: 0.4.9-1. Works fine, per WPA. Reports speed up to 125Mb/s.

I downloaded the zip but I can't find any instructions anywhere on how to utilize the contents of the zip file with DSL. I'm not sophisticated with PCs and could really use a few step by steps.

Gary ^thehatsrule^ Group: Members Posts: 3275 Joined: July 2006 Posted: Sep. 04 2007,00:23 To get the contents of the zip file, open a terminal and use `unzip ` That should get you everything in it, though I think ndiswrapper only needs the.inf and.sys files. GDSLC Group: Members Posts: 8 Joined: Aug. 2007 Posted: Sep. 05 2007,01:01 Hi and thanks for the reply. After unzipping I see a directory structure that looks like this: home/dsl/WPC54GS Setup Wizard 2.1/Driver/9X and home/dsl/WPC54GS Setup Wizard 2.1/Driver/NT Both directories have 3 files: LSBCMNDS.cat, LSBCMNDS.inf, and bcmw15.sys but I don't know which to use, I don't want to pick the wrong ones and then have trouble trying to uninstall them. Also, I don't understand how to use NDISWRAPPER.

After choosing it from DSLpanel, it displays 4 fields: Inf file - I assume I put the path to one of the inf files listed above? Device - it already has the value 'wlan0' pre-filled sid - is empty (is this the name of my router?) wep - is empty GDSLC jpeters Group: Members Posts: 804 Joined: April 2006 Posted: Sep. 05 2007,01:21 Quote (GDSLC @ Sep. 04 2007,21:01) Both directories have 3 files: LSBCMNDS.cat, LSBCMNDS.inf, and bcmw15.sys but I don't know which to use, I don't want to pick the wrong ones and then have trouble trying to uninstall them.

Also, I don't understand how to use NDISWRAPPER. After choosing it from DSLpanel, it displays 4 fields: Inf file - I assume I put the path to one of the inf files listed above?

Device - it already has the value 'wlan0' pre-filled sid - is empty (is this the name of my router?) wep - is empty GDSLC I'm guessing the windows/9x drivers should work. Paste them into home/dsl and direct ndiswrapper to /home/dsl/LSBMMNDS.inf (you can rename it to 'netcard' so that the default name works). Check what your SSID is for your router.it probably defaults to 'linksys.' Run 'ifconfig' in aterm to check what interface to type in.

It's usually eth0 or ath0. If you haven't set up WEP, don't put in anything. The SSID and WEP setting are usually found by typing 192.168.1.1 into your browser. The default user is 'admin', with no password. Roberts Group: Members Posts: 4983 Joined: Oct.

2003 Posted: Sep. 05 2007,01:23 Typically the.inf and.sys files need to be in the same directory.

If you wish to manually issue commands and step through the process you can. Open a xterm as root cd into the directory containing the.inf and.sys # ndiswrapper -i LSBCMNDS.inf Then check by using this command # ndiswrapper -l Should say hardware # modprobe nsidwrapper Next check to see if a wireless ethernet device has been created by using # iwconfig Hopefully you will see an unconfigured device, likely wlan0 If your router broadcasts and is open, no wep, you can try # pump -i wlan0 If you are using wep then you can use instead # iwconfig wlan0 essid name-of-your-router key 99:99:99:99 Where 99:99. Is your wep entered as colon separated pairs. Then finally # pump -i wlan0 There could be many reasons for failure, like irq conflicts, bus assignments etc.

But by steppping through the process you can see how far you can get. HTH 9 replies since Sep. 03 2007,21:55 :::: Pages: (2) 1.

How to Install WUSB600N Adapter with the Windows 7 Drivers. Running Windows 7 with the WUSB600N (v.2). Here is how I got it to work. The driver support is not a.exe.

You will have to install it yourself.but it's not a big deal. Download the Windows 7 driver for your OS version from the Linksys Support page.

Save it to the desktop and then unzip it to the desktop so you can find it easier. Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly. What I did was install it through the 'Device Manager'.

Linksys Wpc54gs Ver 2.1 Driver For Mac Pro

(Right click 'My Computer', choose 'Manage', then Device Manager',or use the 'Search Bar under the Start Menu.whatever. Once you are in the Device Manager.

Make sure your WUSB600N is inserted in your computer. Navigate down to 'Network Adapters' If you see your WUSB600N adapter.great! Your halfway home! Right click on the 'Linksys WUSB600N Adapter.

Linksys Wpc54gs Ver 2.1 Driver For Mac Download

Choose the option to ' Update Driver Software' 5. Choose 'Browse My Computer for Software' 6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform. It should update but, HOLD ON! We are not done yet!!! In order for it to start transmitting in that shiny new 5GHZ band, you must go into 'Network and Sharing Center' Once there, look on the left hand side of the main window and you will see 'Change adapter settings'Go there.

Linksys Wpc54gs Ver 2.1 Driver For Mac Free

You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red 'X' under it (disabled). Right click on your existing adapter and choose, 'DISABLE' Then, right click on the WUSB600N adapter and choose 'ENABLE' The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one).and Viola!! Your new adapter should be singing! I hope this helps! Message Edited by strykertc on 12:33 PM.don't always claim to be a 'techy', but I'll give ya what I think I know.