Ecs M930lr Driver For Mac
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.
Or read our to learn how to use this site. Hi all - first post. A bit of a doozy I'm afraid. I recently purchased a diamondmax ultra 16 250 gb hd, and installed it as a second HD as a master on the secondary ide channel using the cable provided (80 wire) and the maxblast software. The drive works, but responds only in multi-word dma 2 mode.
My boot drive, a 20 gb maxtor fireball, functions fine in UDMA 5. I have a 1.5 GHz P4, SiS motherboard, running win XP pro. My AMI bios sets and recognises the 250 gb hd as UDMA 6, but windows only allows multi-word dma 2, despite the other HD set as UDMA 5. It would appear that a miscommunication between the bios and XP is occurring. Contacting maxtor gave no useful info. I've tried uninstalling the primary and secondary channels and letting windows reinstall it, updating my IDE drivers, altering registry values to force it into UDMA ( and under device manager dma if available is selected. I have AMI bios that autoselects for UDMA so it cannot be manually adjusted, but udma is recognised.
The 20 gb drive under the primary ide channel as a master, and the 250 gb drive as the secondary master. Changing the 250 gb drive to the primary slave or master still keeps the multi-word dma 2 mode. Changing cables makes no difference.
I tested the HD using the powerblast software, no problems, used other freeware, no problems noted. But the transfer rate remains consistently low at 16.4 mb/s, no ups, no downs. It's obvious that the restriction in performance is due to it's inability to use UDMA instead of multi-word dma 2. I don't want to do a clean install of XP because of the time involved with updates and making configuration changes.
I've read in forums the problem may be linked to the ESCD and that clearing it may solve the problem, but I'm not certain about doing this. Would installing an additional IDE controller card and forcing a new channel help? This is very frustrating, because there appears to be NO good reason why it does this.
I've found two other people through usegroups that have had the same problem, but the posts were old and no solutions noted other than a clean install of xp for one person. If a clean install helps, there must be a way to change the configurations somewhere. I am out of ideas. I do have sp2 installed, updates all in place.
Mobo AMIBIOS #: 62-1107-01111-040201-SiS645 Mobo Manufacturer: Hsing Tech - ECS M930LR (yes, not SiS ) This web page has my nearly identical MOBO - except the SIS chip near the pci slots is labelled XP4 HT7961 instead. PCchips doesn't list a bios update for my model M930LR that I could find. I have no problem with adding a pci IDE card, but wonder if it would help given that the system has no problem recognising my other HD as UDMA 5. Unless something about the UDMA 6 signal is throwing it off?
Edited by Cheffy, 11 July 2006 - 09:30 AM. Hsing Tech - ECS M930LROh boy, one of those.
In order for full compatabilty with UDMA6 mode, your mainboard must support UDMA 133, which it does not. Max is UDMA 100 (UDMA5) Even if you could change the mode via the bios, you're still losing out on drive performance. Also, you wouldn't want to configure these two drasticly different drives on the same IDE either. A supported controller card, such as will work around the limitation. You might want to look at the Promise line of cards which are the most popular today. I only posted the above example because I have to jump a plane in a couple hours and it was right there.
Edited by HitSquad, 11 July 2006 - 10:10 AM. I've come to the conclusion that I will not find my exact MOBO on the net due to certain peculiarities. It is almost identical to the PCCHIP M930LR. Mine is red too, but noted the southbridge chip as XP4 ht7961 - the SiS 961 chip. However this model is not mentioned on the PCCHIP website, next closest being this set: It is also almost identical to the ECS P4S5A - exact same layout, but different colour.
I'm not convinced flashing the bios would help anyway, it already recognises it as a UDMA 6 device there. I was thinking of clearing the CMOS and or ESCD - what are the problems associated with this? Rambling away, but here I go. Well, I downloaded the newer drivers the other day but it didn't seem to help. I just tried something to see what would happen - I removed the primary and secondary channels in device manager as well as the ide controller. I then shut the computer down, and cleared the cmos. I figured this should clear the bios and windows of hardware info, and start everything fresh.
Well, I reconfigured my bios, reloaded windows, and winxp reloaded all the hardware and my SiS drivers. I tried loading them manually, but windows says the current driver are already updated. Now after loading this hardware win xp wanted to restart. Before that, I took a peek at the devices on the channels. For the primary channel with my boot drive it noted DMA enabled, but did not list a current transfer mode and showed 'Not Applicable'.
But for my 250 gb drive it showed 'Multi-word DMA-2'! It's as though it is hard wired in, simply bizarre. I did try the drive on another (older) system, but it was using win 2000. It showed the transfer mode for both the boot drive and my drive as 'Udma Mode'. No listing of UDMA type. The mobo probably only supported UDMA-66 anyways.
Not sure what to make of this. BTW, my IDE drive version is: 5.1.1039.2041 The one from that package.
The drivers for the primary and secondary channels are from microsoft system32, version: date: ver:5.1.2600.2180 I'm assuming that this is for the channels themselves. My next step is that I'm installing winxp temporarily on the new drive. I will remove my current boot drive and set up the 250 gb as the master. Then I will install WinXP (with SP2) and see if the drive is recognised as UDMA-5 or 6. If it still says DMA-2, I plan to return the drive.
Might just be my hardware, but I'm not taking any chances. Besides, the drive is supposed to be 'whisper quiet', but when under heavy use makes a racket compared to my older 20 gb. Probably nothing, but better safe than sorry. What do you think? Hi again Cheffy. I see you're still at it.
From your original post, I would have thought that setting it up as a master on the primary by itself was something you already did. As you found out, your board is a clone. It was manufactured for pcchips. I don't believe the drive is defective. Your bios is identifying the correct UDMA setting, which is correct for the drive. Keep in mind that just because the bios is identifying the drives default UDMA mode, it does not mean it is capable of handling it correctly.
I think this may be throwing some confusion in to your diagnosis. Please correct me if I'm wrong. I still think it's a bios and or chipset limitation and the only solution (outside of a controller card) are updates for for both that specifly address the issue.
Maxtor use to make a drive utility that would let you reset the UDMA mode on a drive to workaround this issue in the past. But again, it really defeats the purpose of having a faster drive by using a lower UDMA mode. If you decide to return the drive, don't replace it with the same one. Thanks for the reply- Hope your trip went well. So are you suggesting that while the BIOS recognises the UDMA mode, this confuses it to the point where it won't use UDMA at all and instead reverts to the highest normal DMA mode?
If so, would adding a separate controller card help, or would it run into the same problem? Does it circumvent this? If so, I'm definitely game!
I'd like to hold off on purchasing a new computer just yet. EDIT - I think I found the answer to my question: I suppose what confuses me is the fact that it won;t run in UDMA at all. If it simply didn't run in UDMA-6 and in 5 instead, I'd agree it was a bios/driver issue, and be fine with this.
Ecs M930lr Driver For Mac Download
But it doesn't default to the next supported UDMA at all, and is automatically reverted simply to DMA-2. But, perhaps the built-in logic on the HD confuses the heck out of my bios (AMIbios version 1.12.06 updated november 2001). Thanks again, Cheffy Edited by Cheffy, 13 July 2006 - 10:58 AM. I think there's still some confusion here. The HD's UDMA mode is preset at the factory. There is nothing you can do to change that unless the drive maker offers a utility or jumper to do so. The drive will not just 'fall back' to the next UDMA mode, that's not how it works.
A controller card uses it's own built in bios to workaround any mainboard and bios incompatabilities. Your motherboard's bios and chipset are out of the picture completely.
It's foolproof but you must match the card to the drives specs, such as the example I left in an earlier post. Edited by HitSquad, 13 July 2006 - 12:55 PM.
This makes a lot more sense to me now. I was under the impression Win XP would simply 'fall back' on UDMA modes as per 'For repeated DMA errors. Windows XP will turn off DMA mode for a device after encountering certain errors during data transfer operations. If more that six DMA transfer timeouts occur, Windows will turn off DMA and use only PIO mode on that device. In this case, the user cannot turn on DMA for this device. The only option for the user who wants to enable DMA mode is to uninstall and reinstall the device. Windows XP downgrades the Ultra DMA transfer mode after receiving more than six CRC errors.
Whenever possible, the operating system will step down one UDMA mode at a time (from UDMA mode 4 to UDMA mode 3, and so on).' However, perhaps this only occurs when support for the device is there initially and other errors occur. Maybe it's actually running in PIO-4 mode, and for some reason is noted as in DMA-2. The data transfer rates are the same (max 16.7 mb/s). Oh well, I'm going to pick up the controller card regardless tomorrow. I live in a small town and decent computer hardware is a 40 min drive away.
Feb 28, 2013 - Hi, Can anyone point me in the right direction for how to connect to my Catalyst Switch over console using OSX terminal. I've got my blue DB9. Solved: I have a MAc book air with OS x 10.7.5, I bought the adapter usb to serial. A Mac OS X system USB port to the console using the built-in OS X Terminal. Jump to Connecting to the Console Port with Mac OS X - To connect a Mac OS X system USB port to the console using the built-in OS X Terminal utility: 1. 
Thanks for all the help! EDIT - After looking over the pdf manual I downloaded from the maxtor site, it states that: 'The maxtor diamondmax 10 hard disk drives support all ultra DMA data transfer modes (0-5) defined in the ATA/ATAPI-6 standard. In addition, these drives support Mode 6, and can send and receive data at the full 133MB/s transfer rate.' So it should be able to run at UDMA 5, which I know my mobo definitely supports. Now I'm confused again. Edited by Cheffy, 13 July 2006 - 05:35 PM.
So it should be able to run at UDMA 5, which I know my mobo definitely supports. Now I'm confused againYou would need to be able to make that change in the bios, which you said is locked and will not let you reset it.
(from udma6 to udma5). If you could, then you would be ok, follow? For windows to correctly handle the drive, it needs to be first set correctly in the bios. Me thinks your still in 'fall back' mode. I really have no other suggestion then a compatable controller card that would put an end to your problem. It will also allow for future storage expansion. They're really very nice to have and don't cost much $$.
Thanks for the clarification, sometimes me brain no work good. I picked up an adaptec controller today, will try it out. Yeah, not a promise card, but around here choices are limited and I'm too impatient to wait for online delivery. The nearest shop is 40 min away! The guy there gave it to me 40% off, not too shabby.
I'll report back tonight! Incidently, I think I found an update for my bios, which is supposed to have a fix for ata 133 support. But because my board is a clone, I'm a little concerned about it being the right one. The guys down at www.wims.com basically said there's almost no chance it's the wrong one though.
Update - Success! The card works!! I had a bit of trouble at first, as the card kept stopping right as it loaded its own BIOS, forcing me to restart. I eventually determined that it had to be in the 1st PCI slot, my Mobo BIOS must shut the other 4 PCI slots down after loading until the OS is open.
Ecs M930lr Driver For Mac Free
Now I attained an average 54.1 mb/s transfer rate, with bursts up to 110.4 mb/s, or about 3.24 times as fast as previously. The average seek time was 14.4 ms.
I'll not bother updating the bios then, if the only problem it gave me was a lack of ata 133. For $45 (cdn) with tax it was an okay price for what seems to be good performace.
Thanks again for all the help! Edited by Cheffy, 14 July 2006 - 03:57 PM.
Tell them you believe repair should be fair, affordable, and accessible. Use a plastic opening tool to gently detach the top cover from the laptop’s base. Skip to main content.
Technology Explained What Is Bitcoin? Click the “Driver” tab and then click “Disable. Battery 2 steps Keyboard 4 steps Top Cover 6 steps Touchpad 6 steps. Uploader: Date Added: 23 April 2017 File Size: 13.79 Mb Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X Downloads: 40062 Price: Free.Free Regsitration Required Why is the touchpad of my Asus Eee PC not working? When I install new drivers from the Asus site, it works for one restart, and then stops asus eee touchpad on the second restart.
Unless otherwise stated, all performance claims are based on theoretical performance. Brand and asus eee touchpad names dee are trademarks of their respective companies.
It’s time to speak out for your right to repair We have a chance to guarantee our right to repair electronic equipment—like smartphones, computers, and even farm equipment. How to Disable the ASUS Eee PC TouchPad Clips hold the bottom portion of the keyboard to the touchpaad.
Actual figures may vary in real-world situations. This asus eee touchpad has an icon of a touchpad on it, which indicates it’s the hot key for enabling and disabling the touchpad. It seems to be a very common problem for those netbooks. Double-click “Mice and Other Pointing Devices” to expand the section. Technology Explained What Is Bitcoin? This is my laptop machine and I want my Touchpad restored.
Ecs M930lr Driver For Mac Pro
Although we endeavor to present the most accurate asus eee touchpad comprehensive information at the time of publication, we reserve the right to make changes without prior notice. How to Disable the ASUS Eee PC TouchPad Do you use a usb mouse? To reassemble your device, follow these instructions in reverse order. Small – px Medium – asus eee touchpad Large – px. If you’re still under warranty, call ASUS. Caution Follow this step to detach the upper portion of the keyboard, but do not remove it from asus eee touchpad laptop. To do so, go into device manager, and check for the properties of the touchpad.
Tell them you believe repair should be fair, affordable, and accessible. Depending on which text editor you’re pasting into, you might have to add the italics to the site name. When asus eee touchpad HAB restarts, wee goes to some default microsoft driver that works fine, but apparently doesn’t have some hotkey functionality. Father’s Day Gift Guide. I did not complete this guide. Sheldon Chu Member since: Please check with your supplier for exact offers.
Join the cause and tell your state representative to support Right to Repair. In fact, this one worked fine for months and then developed this touchpad problem. Typically, this is qsus “F3” key. The cable from the asus eee touchpad to the motherboard is not connected properly?
Maybe they need to fix it. The touchpad on your Asus Eee PC gives asus eee touchpad onscreen navigability without requiring a mouse, and it also offers finger gestures, such as zooming, scrolling and rotating. Product specifications may differ from country to country. Click the “Driver” tab and then click “Disable.
Specifications and features vary by model, asus eee touchpad all images are illustrative. Gently lift the upper portion of the keyboard and then move the entire keyboard towards the computer’s screen until the ribbon cable toucbpad visible. Tools Buy these tools.